If you’re using a sanding block, rather than a pole sander, then you may also want to buy a corner sander. They can also be used to cover large areas from a single spot, which makes them more convenient than blocks or sponges. They can be used to reach the tops of walls and ceilings, without having to keep getting up and down ladders.
#DRYWALL TAPE TOOLS MANUAL#
The Pole Sander is really just a manual sander attached to the end of a pole. You don’t want to sand with the coarse and follow that directly with the fine, because the coarse will leave marks that the fine can’t sand out. You do need multiple grits from coarse down to fine. For smaller jobs, you can get handheld wood blocks with sandpaper on one side. You will need something to smooth the rough spots over the seams once the drywall mud has dried. It is possible to complete the corners using your standard knives but it will be easier using a corner knife that is dedicated to the task. Again, this is used for touching up your tape work only.Īs well as the 4” or 6”, and the 12”, drywall knives, you can also buy a drywall corner knife. As with any good sanding job, you should start out with an abrasive surface.Īn abrasive sanding sponge looks like a kitchen sponge but is extremely coarse on one side and slightly less coarse on the other side.Ī non-abrasive sanding sponge has a smooth surface with no grit on one side and a very light grit on the other. The sanding process is one of the most tedious and time-consuming aspects of drywalling. Though drywall sanding sponges work well for smoothing your walls, you don’t want to depend on them to do the whole job for you.
Aluminum pans are lightweight which means that they can be shifted around easily while holding all the mud you’re going to use.
They’re available in multiple sizes and you should ensure that you buy one that is big enough without being overly cumbersome. They are used to hold the mud while you transport it around.
0 kommentar(er)
